WMO WVO Oil Centrifuge 120 Gph with Brass

Description

The flow rate capacity of the waste oil centrifuge is 2 GPM or 120 gallons per hour.
The unique design of the nozzles located on the top of the rotor make this oil cleaning centrifuge an excellent choice for water removal - when shut down, it is impossible for any water or contaminants to leak into your clean oil.
The oil centrifuge measures 6" in diameter by 9" tall.
Rotor is capable of holding 26 oz. of contaminants.
Brass hose barb is 3/8.
PSI gauge allows for monitoring the oil pressure, which should never rise over 90 PSI.
One 55 gallon drum of oil will take approximately 27 minutes to process. The viscosity is the critical part of this equation. Oil centrifuge generates at (85 PSI) a centrifugal force 2,000 times greater than gravity at 8800 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation.
The oil centrifuge will filter waste vegetable oil, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a wvo filtration system with this unit. Waste oil centrifuges are used in the alternative fuels market for cleaning WVO, WMO, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below .5 micron by centrifuge filtering and use as fuel for your diesel run vehicle or equipment. All internal centrifuge parts certified nickel plated to prevent rust and corrosion.