Half Off Ponds Water Treatments Sludge Remover 16 oz. Bottle H2OP-SR016OZ

Description

Half Off Ponds Sludge Remover - Dissolves Muck Naturally
Half Off Ponds Sludge Remover helps you achieve a beautiful pond with less maintenance. Half Off Ponds Sludge Remover is specifically formulated to easily remove sludge and other organic matter from the bottom of your pond. Sludge Remover eliminates the potentially harmful gases caused by pond sludge.
Its concentrated formula helps break down muck, sludge, leaves, and remove odor from ponds. Half Off Ponds Sludge Remover is safe for fish and aquatic plants.
Directions:
Use 1 oz. per 10 sq. ft. Sprinkle a thin layer directly into the problem areas of the pond. Use a routine maintenance schedule.
Note:
Treatment may need to be increased to be increased to 1/4 cup for every 1000 gal. in ponds with very poor water quality. For optimal results ensure: A pH of 5.7-9.5, a water temperature of at-least 48°F, and proper circulation via a pump, fountain, or waterfall.
KEEP OUT OF REACH OF CHILDREN. STORE AT ROOM TEMPERATURE. FOR USE IN CLOSED SYSTEM PONDS ONLY.
ATTENTION:
Failure to use as directed may result in loss or injury to aquatic life. Half Off Ponds is not responsible for any loss to aquatic life. Not for human consumption. Not for use with fish farming.
Half Off Ponds Water Treatments Sludge Remover 16 oz. Bottle H2OP-SR016OZ
Half Off Ponds Sludge Remover - Dissolves Muck Naturally
Half Off Ponds Sludge Remover helps you achieve a beautiful pond with less maintenance. Half Off Ponds Sludge Remover is specifically formulated to easily remove sludge and other organic matter from the bottom of your pond. Sludge Remover eliminates the potentially harmful gases caused by pond sludge.
Its concentrated formula helps break down muck, sludge, leaves, and remove odor from ponds. Half Off Ponds Sludge Remover is safe for fish and aquatic plants.
Directions:
Use 1 oz. per 10 sq. ft. Sprinkle a thin layer directly into the problem areas of the pond. Use a routine maintenance schedule.
Note:
Treatment may need to be increased to be increased to 1/4 cup for every 1000 gal. in ponds with very poor water quality. For optimal results ensure: A pH of 5.7-9.5, a water temperature of at-least 48°F, and proper circulation via a pump, fountain, or waterfall.
KEEP OUT OF REACH OF CHILDREN. STORE AT ROOM TEMPERATURE. FOR USE IN CLOSED SYSTEM PONDS ONLY.
ATTENTION:
Failure to use as directed may result in loss or injury to aquatic life. Half Off Ponds is not responsible for any loss to aquatic life. Not for human consumption. Not for use with fish farming.
Half Off Ponds Water Treatments Sludge Remover 16 oz. Bottle H2OP-SR016OZ
Dissolves muck naturally and eliminates the potentially harmful gasses released by pond sludge.
Specifically formulated to remove organic matter and bottom solids.
Concentrated formula provides maximum performance.
Bacterial enzymes are activated in water that is 60 degrees or higher.
Safe for fish and aquatic plants.
FAQs & Calculations to Help Select the Correct Kit
1. How Many Gallons of Water does My Water Feature Hold?
Rectangular Ponds
Length x Width x Average Depth x 7.48 = Gallons
Example: A rectangular pond 15’ long, 10’ wide and 1.5’ Deep Pond is...
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Oval Ponds
Length x Width x Average Depth x 0.8 x 7.48 = Gallons
Example: An oval pond 15’ long, 10’ wide and 1.5’ deep is...
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Round Ponds
Length x Width x Average Depth x 7.48 =Gallons
Example: 15’ long, 10’ wide and 1.5’ Deep Pond
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
Streams
Length x Width x Average Depth x 0.25 x 7.48 = GALLONS =Gallons
Example: 15’ long, 10’ wide and 1.5’ Deep Pond
15’ x 10’ x 1.5’ x 7.48 = 1683 Gallons
2. How Big of a Pump Do I Need??
Minimum pump size is determined by pond type, water volume, head height and friction loss. The minimum pump size recommendations are:
Water Garden, Few Small Goldfish
Circulate total pond water valoume every 2 hours.
Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
Fish Pond, Several Small Fish
Circulate total pond water valoume every 1 hour.
Example: 3,800 GPH pump for a 3000-gallon pond with 2’ waterfall.
Koi Pond, Several Large Fish
Circulate total pond water valoume every 3/4 hours.
Example: 2,000 GPH pump for a 3000-gallon pond with 2’ waterfall.
Calculating Head Height
Dynamic head pressure is found by taking the vertical height of your waterfall; the distance between where your pump is (typically in the skimmer) and where your waterfall is, and adding the static head pressure (pipe and fittings) 1’ for every 10’ of tubing and 1’ for every elbow or “T” fitting.
Example: 3' (vertical height) + 2.5 (25' of tubing) + 2' (for 2 elbows) = 7.5' of Dynamic Head Pressure
Note:
It is important to take into consideration while calculating how much flow will be at the top of your waterfall by accounting for the head height due to the laws of fluid dynamics. Please refer to the flow chart above to help choose the correct pump.
3. What Size Tubing Do I Need?
Tubing Size
Efficiency GPH
Minimum GPH
Maximum GPH
0.5”
< 300
60
420
0.75”
< 720
300
900
1”
< 1,200
700
1,500
1.25”
< 1,600
900
3,200
1.5”
< 2,600
2,000
4,400
2”
< 4,800
3,000
6,800
3”
< 9,000
6,000
14,000
4”
< 21,000
14,000
28,000
6”
< 42,000
33,000
60,000
About Half Off Ponds
Customer service is our business. We have been satisfying fish pond, water garden, and backyard waterfall enthusiasts for over 25 years! We're glad to assist you with your pond building project - from start, to finish!
Thanks for your business! We appreciate it!
- The Half Off Ponds Team