-40%

108 GPH CENTRIFUGE w/BRASS, GAUGE and BRACKET for WVO /OIL and BIODIESEL

$ 205.91

Availability: 89 in stock
  • Item must be returned within: 14 Days
  • Refund will be given as: Money Back
  • MPN: 108bkt
  • Brand: Pa Biodiesel Supply
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Model: PAB-108BKT
  • All returns accepted: Returns Accepted

    Description

    If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
    See videos
    at Centrifuge for Dummies
    When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind.
    Oil filtering is the most important part of using wvo or wmo as fuel.
    Oil centrifuges
    clean and dewater your oil to below .5 micron.
    When building a
    filtration unit
    , you will need a
    gear pump
    and
    drum heater
    .
    Specifications
    Centrifuge comes with bracket, pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
    The flow rate capacity of the wvo centrifuge is 1.8 GPM or 108 gallons per hour. The centrifuge measures 5.4" in diameter by 9.8" tall. Rotor is capable of holding 20 oz. of contaminants. One 55 gallon drum of WVO will take approximately 30 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates (at 90 PSI) a centrifugal force 2,000 times greater than gravity at 8000 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge.
    All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
    Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
    Bushings and shaft wear are not covered under this warranty
    INTERNATIONAL SHIPPING
    Canada and Mexico 
    5
    All other countries $
    7
    0
    We are not responsible for international custom or VAT charges.
    For all your oil filtration
    needs visit us at
    Pa Biodiesel Supply